1974 Aston Martin V8 Saloon

33 Bids Winner - micker747
8:01 PM, 12 Jan 2024Vehicle sold
Sold for

€39,838

(inc. Buyer’s Premium)
Winner - micker747
consigner image

Mark's review

Mark Livesey - Consignment Specialist Message Mark

“ An exciting project for someone, and it comes with a previous original German title document. ”

Matching numbers British classic.

Background

The Aston Martins that followed on from the DB6 were very obviously from the pen of a different designer.

They took their aesthetic cues from the design zeitgeist of the 60s and 70s, not the 40s and 50s. They also tipped an unapologetic and undisguised nod to America’s muscle cars – the Ford Mustang in particular.

After the DB6 came the DBS, still with a six-cylinder engine and patiently awaiting the arrival of a V8 that promised to give the car the grunt to go with the grace.

The V8 proved to be well worth waiting for. It was a proper muscle car and one that owed its squat, steroidal stance and sleekly aggressive profile to the design pen of Aston’s William Towns.

The engine was designed by Polish émigré Tadek Marek, a man whose inimitable engineering imprint stretches from the DBR2 racing car engine, through the redesign of Aston’s venerable, Bentley-derived straight-six, to the development of the 5.3-litre V8 for the DBS V8 in 1969.

Several iterations later, this fabulous powerplant only reluctantly retired once it had motored into the new millennium, bulked up to 600bhp, and propelled the Vantage 600 to speeds reputedly in excess of 200mph.

The Aston Martin V8 Series 2 was the first of the line to be known simply as the V8 (its predecessor, the DBS V8, was effectively the Aston Martin V8 Series 1, although it never bore that moniker).

Weber carburettors were reinstated for the Series 3 in 1973, and the cars were identifiable by the larger bonnet scoops designed to accommodate them. Series 3 V8s could reach 60mph in 5.7 seconds with a manual gearbox, and although performance was somewhat neutered by emissions regulations in 1976, cars with the following year’s ‘engine enhancements were back up to 305bhp.

The last Series 3 cars were produced in October 1978, by which time a total of 967 Series 3 V8s had rolled off the production line at Newport Pagnell.

Every car took around 1,200 man-hours to build and each was every bit as handmade as a Savile Row suit.

The Aston Martin V8 may have had more than enough testosterone to compete with the Mustangs, Chargers and Corvettes of its trans-Atlantic cousins, but it did so with all the unmistakably British pedigree and class of a gentleman’s club.

Key Facts


  • Rare
  • Good condition for age
  • Low Miles

  • V8/11257/LCA
  • 30873 kms
  • 5340 cc
  • auto
  • Metallic 'Ice' Blue
  • Beige Leather
  • Left-hand drive
  • Petrol

Vehicle location
Nieuw Vennep, Netherlands

Background

The Aston Martins that followed on from the DB6 were very obviously from the pen of a different designer.

They took their aesthetic cues from the design zeitgeist of the 60s and 70s, not the 40s and 50s. They also tipped an unapologetic and undisguised nod to America’s muscle cars – the Ford Mustang in particular.

After the DB6 came the DBS, still with a six-cylinder engine and patiently awaiting the arrival of a V8 that promised to give the car the grunt to go with the grace.

The V8 proved to be well worth waiting for. It was a proper muscle car and one that owed its squat, steroidal stance and sleekly aggressive profile to the design pen of Aston’s William Towns.

The engine was designed by Polish émigré Tadek Marek, a man whose inimitable engineering imprint stretches from the DBR2 racing car engine, through the redesign of Aston’s venerable, Bentley-derived straight-six, to the development of the 5.3-litre V8 for the DBS V8 in 1969.

Several iterations later, this fabulous powerplant only reluctantly retired once it had motored into the new millennium, bulked up to 600bhp, and propelled the Vantage 600 to speeds reputedly in excess of 200mph.

The Aston Martin V8 Series 2 was the first of the line to be known simply as the V8 (its predecessor, the DBS V8, was effectively the Aston Martin V8 Series 1, although it never bore that moniker).

Weber carburettors were reinstated for the Series 3 in 1973, and the cars were identifiable by the larger bonnet scoops designed to accommodate them. Series 3 V8s could reach 60mph in 5.7 seconds with a manual gearbox, and although performance was somewhat neutered by emissions regulations in 1976, cars with the following year’s ‘engine enhancements were back up to 305bhp.

The last Series 3 cars were produced in October 1978, by which time a total of 967 Series 3 V8s had rolled off the production line at Newport Pagnell.

Every car took around 1,200 man-hours to build and each was every bit as handmade as a Savile Row suit.

The Aston Martin V8 may have had more than enough testosterone to compete with the Mustangs, Chargers and Corvettes of its trans-Atlantic cousins, but it did so with all the unmistakably British pedigree and class of a gentleman’s club.

Video

Overview

This car is offered from outside of the European Union. It has been imported under temporary admission customs bond and is therefore subject to Dutch import tax (9%) on top of the winning bid price. If exporting immediately to another country, then tax/duty will only be paid in that country.

The winning bidder will also pay €500 customs charge on top of the ‘hammer’ price.

The winning bidder will receive a receipt for the final hammer value, as their proof of purchase.

This vehicle has been on static display in the Middle East for a number of years and the only history or paperwork available is displayed in the photo gallery. In all cases the papers shown are photocopies unless otherwise stated. We do not have the original paperwork.

Unless otherwise stated, we have not tried to start or drive the car and cannot vouch for its mechanical viability or functionality. The car is not registered anywhere.

It will require recommissioning prior to road use and is sold ‘as seen’.

As CARS Europe BV is the guarantor of all customs duties and taxes for vehicles within Dutch customs bond, the car cannot be released until full payment received.

All storage charges (€30 + local VAT per day commencing from the sixth day following the auction end) must be paid in full prior to the vehicle’s collection or onward transportation. Collection and viewings are strictly by appointment only.

Please send an email to the storage centre to ensure vehicle(s) are ready at time of collection. Photographic ID will be required at time of collection. If a third party is collecting for you, then written authorisation is required in advance from you and photographic ID of the third party is required at the time of collection.

CARS Europe BV will contact you after the balance payment is received to confirm onward transport requirements. For enquiries about import tax and shipping contact Madam Joanna Herlihy, +31 (0) 252 682 526, +44 7483 433912, joanna@carseurope.net.

 

VIN: V8/11257/LCA.

Engine Number: V/540/1257.

In common with many vehicles from the vendor’s collection, this 1974 LHD auto Aston Martin V8 Saloon comes with little paperwork beyond whatever photocopied documents are shown in the gallery section.

It does, however, come with its original German registration documents.

It also comes with some AMOC (Aston Martin Owners’ Club) records, and proof of purchase by the vendor.

It was sourced in Germany for the vendor’s collection of static display vehicles 2008.

Today, the odometer reads 30,873 kms.

The now pale metallic blue (code: Du Pont Opel 267 A.O.) car left the factory with an ‘Ascot Grey’ exterior and blue interior. The interior is now upholstered in beige leather.

We haven’t tried to start or drive the car, so our appraisal of it is limited to its cosmetic appearance.

Exterior

In general, the car’s bodywork is pretty good - all panels, panel gaps and shut lines are consistent and even - and the pale blue metallic paintwork gleams with plenty of shine and lustre.

The major talking point here is the fact that the boot lock has been capped and sealed off, meaning that the boot cannot be conventionally opened from the outside.

Why?

Well, our guess would be that it is an attempt to stop any further damage being done to the edge of the boot lid where it’s been bent out of shape by continual rubbing against the fuel filler flap on the passenger side.

That said, the risk could be obviated by simply lifting the fuel filler flap prior to opening the boot.

It’s all a bit of a mystery – at least to us.

If you want to open the boot, you can do so by pulling on a wire cable protruding into the cabin through the rear of the driver’s side door closure.

There is a split in the front valance.

In general, the chrome, wheels, badging and other exterior fixtures and fittings are in good order.

That said, the only wheel to have retained its centre cap is the one sitting on the back seat, and a section of chrome trim around the passenger-side rear window looks a bit bashed out of shape.

There’s a scratch beneath the boot lid and some bubbling at the base of both ‘A’ pillars.

There are also some scuffs to the paint on top of the rear wing on the same side and a crack in the paint where the wing meets the base of the door.

The ‘nose’ of the car ahead of the bonnet has a few scuffs in evidence and there are a few paint chips around the driver’s side front wing.

One or two scuffs can be seen on the roof, on the driver’s door and on the section of wing immediately behind it.

Interior

The interior is dusty, grubby and would thanks its next owner for a prolonged and vigorous encounter with some soapy water and a cloth.

But it’s not in fundamentally bad condition.

The leather upholstery has a few creases here and there, but it is intact, comfortable and functional.

The carpets and mats are OK but a little tired in places. The same can be said of the door cards and headlining.

The carpet on the transmission tunnel is split.

We have been unable to open the glove compartment.

The dashboard and controls look reasonable.

We can’t make any claims about the functionality of switches, knobs, levers, toggles, buttons, dials or other electrics as we haven’t started or driven the car.

Mechanical

The dusty but dry engine and engine bay look to be in good condition and everything appears to be in its right and proper place.

The undersides of the car seem to us to have plenty of structural integrity.

History

Unless otherwise stated, this car comes with no history or service records beyond whatever photocopied documents are shown in the gallery.

It must be registered in the country of your choice and you will need to contact the appropriate vehicle licensing agency for instructions on how to do this.

Summary

Quirky boot opening arrangements aside, this appears to us to be a very decent example of the model and nothing we’ve seen has made us doubt its quality or integrity - provided, of course, that the engine, electrics and mechanicals prove to be amenable to recommissioning.

We’re confident to offer this car for auction with an estimate of €50,000 -€55,000.

Viewing is always encouraged, and this particular car is located in a bonded warehouse near Amsterdam. To arrange an appointment please use the Contact Seller button at the top of the listing. Feel free to ask any questions or make observations in the comments section below, or try our ‘Frequently Asked Questions’.

About this auction

Seller

Private: undefined


Viewings Welcome

Viewing is strongly encouraged, and is strictly by appointment. To book one in the diary, please get in contact.

7c44d0ba-e3d5-46c9-b6df-957f4dbf0d6b/38382e7c-f705-4125-b12d-d16be217029d.jpg?optimizer=image&width=650&format=jpg image

Thinking of selling your Aston Martin